Tank Farm Simulation Additional Flows: Losses, Additives and Removable Streams in Refinery Digital Twins

       Tank farm simulation is a modeling approach used in oil and gas logistics to represent storage behavior in refinery networks and terminals. It supports refinery operations, where hydrocarbons are accumulated, stored, and dispatched under operational constraints. In modern refinery storage systems, simulation captures flow dynamics, pipeline inflows, and production fluctuations. These storage mechanisms are also used in crude oil supply chain simulation. Within a digital twin, tank farm models act as an intermediate layer between production and processing, enabling realistic flow and system interaction modeling. The influence of storage location is described in tank farm placement in refinery simulation models. These models are widely used in production planning to ensure stable throughput and efficient coordination of refinery logistics. Tank farm simulation is also a key element in production planning, enabling coordination between storage capacity, inflow schedules, and downstream demand. In Petroleum Refining Library, production scheduling is coordinated using request-based production planning. The effectiveness of these storage strategies can be evaluated using comprehensive tank farm performance metrics, including flow statistics, storage utilization, and operational indicators collected during simulation. These additional streams are managed as part of the overall reservoir park control strategy.
       Modern refinery and oil & gas logistics systems rely heavily on accurate tank farm simulation models to represent storage, buffering, and shipment of hydrocarbon streams. In digital twin environments such as the Petroleum Refining Library (PRL) implemented in AnyLogic, tank farms are not passive storage units but dynamic process nodes that directly influence material balance, product quality, and refinery logistics performance. Their behavior can be analyzed using flow statistics, storage statistics, and individual tank statistics.
       A key limitation of simplified simulation approaches is the assumption that tank farms operate only with incoming and outgoing flows. Scheduled maintenance can also modify material balance and is discussed in tank repair simulation. In real industrial systems, however, hydrocarbon streams are continuously modified by additional physical and operational mechanisms such as losses, flow removals, and additives. These effects significantly impact simulation model accuracy and must be explicitly represented in a refinery digital twin model. Their impact can be quantified through product loss statistics, material flow statistics, and other tank farm performance metrics.
       This article describes how additional flows in tank farm simulation are modeled, how they influence mass balance, and how they are implemented in Petroleum Refining Library components such as accumulative and flowing tank farms. These tank farm types differ both in their objectives and in their operational logic.This directly impacts production planning in refinery logistics and storage systems. Tank farm simulation supports operational decision-making by providing accurate visibility into residual levels, flow constraints, and dispatch conditions. This visibility is provided by storage statistics, tank utilization metrics, and operational statistics collected throughout the simulation. Storage constraints can also be mitigated through dynamic tank reallocation between refinery tank farms.

       Tank farms are essential infrastructure elements in refinery and petroleum logistics networks. Within a tank farm simulation model, they operate as buffering and transformation nodes between upstream production unit; pipeline transport systems; refinery processing units; storage and shipping terminals.
       Their main functions include:
        - buffering feed streams;
        - stabilizing downstream process input;
        - enabling blending and quality adjustment;
        - supporting shipment scheduling and logistics planning;
        - decoupling production variability from consumption demand.
       In a digital twin refinery simulation, tank farms also serve as control points for residual management and flow regulation. However, realistic modeling requires accounting for secondary effects beyond simple mass transfer.

       The core principle of any refinery simulation system is conservation of mass. For tank farm systems, the generalized material balance can be expressed as:

Incoming Flow + Additives = Outgoing Flow + Losses + ΔResiduals

where:
       Incoming Flow – hydrocarbon feed entering the tank farm;
       Additives – injected chemical or blending components;
       Outgoing Flow – product leaving the tank system;
       Losses – mass lost due to physical or operational processes;
       ΔResiduals – change in stored residual inside tanks.

This equation is fundamental for:

• refinery production planning
• oil and gas logistics optimization
• pipeline balancing
• storage terminal operations
• digital twin validation and calibration

Ignoring any of these components leads to systematic deviations between simulated and real system behavior.

Consider a tank farm system with the following conditions:

• Incoming diesel flow: 100 t/h
• Removable gas flow: 0.3 t/h
• Losses: 0.5 t/h
• Additives: 1.2 t/h
• Inventory increase: +10 t/h

Resulting outgoing flow: 90.7 t/h
This example demonstrates how additional flows directly influence:

• output mass
• internal storage dynamics
• system-wide material balance

Such calculations are critical for:

• refinery production optimization
• pipeline scheduling
• storage terminal management
• digital twin validation

In real refinery storage systems, losses occur during:

• tank filling and shipment operations
• long-term storage (evaporation and breathing losses)
• pumping and transfer operations
• blending and circulation processes

These losses are particularly important for light hydrocarbon fractions, which exhibit higher volatility.

In multi-component hydrocarbon mixtures:

• light fractions → high evaporation losses
• medium fractions → moderate losses
• heavy fractions → low losses

As molecular weight increases, the loss coefficient decreases nonlinearly. This behavior significantly affects at product composition stability; downstream refinery yield; blending quality consistency.

In the Petroleum Refining Library (PRL):

• losses are defined as a percentage reduction of output flow
• losses are applied after internal tank operations
• component-level redistribution follows volatility rules
• lost flow is fully removed from system balance

In the Petroleum Refining Library, losses are represented as a separate independent output stream of product composition, defined in the rp_modes_separation database table. Losses are explicitly identified by the unique identifier ID = LossId.

This ensures physical realism in tank farm simulation models used in digital twins.

       Additives are widely used in refinery operations to modify product properties and ensure compliance with specifications. Typical applications include:

• octane enhancement in gasoline production
• cold flow improvement in diesel fuels
• corrosion inhibition in storage systems
• oxidation stability improvement
• regulatory marking and product identification
• process-specific chemical conditioning

       Unlike physical flows, additives in simulation models are not treated as independent incoming streams. Instead, they represent post-processing modifications applied to outgoing product streams.

       A removable flow is an incoming stream that enters a tank farm system but does not contribute to the outgoing product flow.
Removable flows represent:

• purge gases and vent streams
• internal process consumption
• bypassed or diverted streams
• temporary operational discharges

Operator control of inlet availability and runtime events is covered in accumulative tank farm control.
These flows are essential for representing internal system behavior that does not result in final product formation.

The Petroleum Refining Library (PRL) implements tank farm behavior using two core components:

Petroleum Refining Library supports three fundamental categories of additional flows:

Accurate modeling of additional flows is essential for modern refinery digital twin systems because it impacts:
       1 Production planning - accurate throughput estimation depends on correct mass balance representation.
       2 Logistics optimization - flow distortions propagate across pipeline and storage networks.
       3 Storage management - residuals deviations lead to incorrect shipment scheduling.
       4 Simulation fidelity - without additional flows, model behavior diverges from real systems.
       5 Product quality control - additives and losses directly affect final product specifications.

Modeling additional flows in tank farm simulation systems is essential for achieving high-fidelity representation of refinery and oil & gas logistics operations. Losses, removable flows, and additive injection are not secondary effects - they are core components of real industrial behavior.
The Petroleum Refining Library (PRL) implements these mechanisms through accumulative and flowing tank farm components, enabling robust and scalable digital twin refinery simulation models. By modeling storage constraints and flow interactions, tank farm simulation enhances operational decision-making in refinery planning and execution processes.

By incorporating these mechanisms, Petroleum Refining Library-based tank farm models achieve significantly improved realism in:

• material balance calculations
• production planning
• logistics optimization
• refinery system simulation

1. What is tank farm simulation?
Tank farm simulation is a computational method for modeling storage tank behavior in oil refineries, terminals, and oil & gas logistics networks. It describes how hydrocarbon flows are accumulated, stored, and dispatched under operational constraints.

2. Why is tank farm simulation important in refinery operations?
It ensures stable refinery operations by managing fluctuations in inflow and outflow, maintaining balance, and preventing bottlenecks in storage and transportation systems.

3. How is tank farm simulation used in oil and gas logistics?
It is used to coordinate pipeline flows, storage allocation, and product dispatching across refinery networks and terminals, improving efficiency and reducing operational risks.

4. What is the role of tank farms in a digital twin?
In a digital twin, tank farms represent the storage layer between production units and downstream processing, enabling realistic modeling of residual dynamics and system interactions.

5. How does tank farm simulation support production planning?
It helps optimize scheduling of inflows and outflows, ensuring that storage constraints are respected and that refinery throughput remains stable.

6. What are the main components of tank farm simulation models?
Typical components include input flows, output flows, losses, additives, storage constraints, and control logic for tank selection and dispatching.

7. Can tank farm simulation be implemented in AnyLogic?
Yes, tank farm simulation can be implemented in AnyLogic using discrete-event or hybrid modeling approaches, often as part of a larger refinery digital twin framework.